(1)Long cooling time for plastic temperature,mold temperature,temperature control
(2)Long melt time.Back pressure shall be reduced,try to use recycle material to prevent overhead,need enough cooling of material feeding period feeding period of cooling.
(3)Slow moving action.Make it appropriate to speed up the adjustment through the oil and circuit.
(4)Mould design request easy to demoulding.make to a fully automatic operation.
(5)Products wall thickness cause the cooling time too long.
(6)Nozzle salivate,interfere with the normal production.Should adopt shut-off nozzle,or reduce the temperature of the nozzle.
(7)Cylinder heating quantity shortage.Should change with the plasticizing capacity big machines or strengthen the preheating of material.
(2)Long melt time.Back pressure shall be reduced,try to use recycle material to prevent overhead,need enough cooling of material feeding period feeding period of cooling.
(3)Slow moving action.Make it appropriate to speed up the adjustment through the oil and circuit.
(4)Mould design request easy to demoulding.make to a fully automatic operation.
(5)Products wall thickness cause the cooling time too long.
(6)Nozzle salivate,interfere with the normal production.Should adopt shut-off nozzle,or reduce the temperature of the nozzle.
(7)Cylinder heating quantity shortage.Should change with the plasticizing capacity big machines or strengthen the preheating of material.
Sino mould professional in various mould molding solution
reaserch,And each moulds we will make to moderate mould stripping way and best
cooling system.All the moulds we make according to above moulds items.
Written by Tina
whatsapp:008615167663781
serve@sinomould.com
whatsapp:008615167663781
serve@sinomould.com
没有评论:
发表评论